Message:

Subject: Re: Building cages from Klubertanz catalog
Posted by dominic on February 26, 1999 at 16:39:28:

In Reply to: Building cages from Klubertanz catalog posted by Shunt'e on February 26, 1999 at 16:25:13:

mainly all you need is the wire mesh (preferably vinyl coated), alittle 16-18 gage wire (about 10-20 ft), at least 2-4 cage door latches (depending on how big the door is figure 2 for every 2 foor door or enouh to fully close door with no loose spots) trays to go on the bottom ( # depending on how big the base will be), J clamps and J clamp pliers, 2 regular pair of plier ( needle nose works the best i found) to twist the little wire, and a set of wire cutters....maybe 2 incase one gets dull...

that's pretty much all i used the lite wire is to secure the shelves and such where the J clamps won't fit..wire mess size should be around 1/2 x 1/2, or 1 x 1/2 at the largest...you might need a second persoon when doing final assmebly, it can be hard for 1 person at times.

dom

Follow Ups: