I thought I whould share this about a cage we built. We went to the hardwear store and brought. five six feet long by 21 inches wide shelves and some pull plastic pull ties.The shelves have a plastic coating on them. We connected three of the shelves together in a u shape Then cut the top and bottom and connected them. We then cut the front piece into three peices. secured the botton part then the top and used the other peice for the door. The extra piece we had from the top and bottom of the cage. we used for a cage stand. We bent both end of it about 4" on each side. With a little help from a friend you can make this pretty simple. It costed about $100.00. Its 6 ft tall by 21" square. They dig it,and it works great.If any buddy has any questions. We'll try to help you out. A plus is you can always make it bigger..

Follow Ups: