 | Posted by: | CeCe | | Subject: | cages | | When: | 5:46 PM, 17 Dec 2000 | | IP: | 205.188.197.167 |
which cage is better to get for a sugar glider, a 24by24by30 or a 19by24by30? any comments will be appreciated!!! 
|
| Posted by: | Dawn, DBucalo@neo.rr.com | | Subject: | none | | When: | 6:07 PM, 17 Dec 2000 | | IP: | 24.164.115.229 |
The bigger the better, IMHO. Taller is better than short and wide, because they like height.
| Posted by: | Tucker, mcbergeson@yahoo.com | | Subject: | none | | When: | 11:03 PM, 17 Dec 2000 | | IP: | 12.75.103.55 |
The bigger the better. I personally have a 24x24x48 for one glider, and she loves it (especially the height) I wouldn't get her anything smaller.
I bought my cage material from Klubertanz. They sell the 16 gauge vinyl coated wire for pretty cheap. I got everything I needed to make my cage for under $50.00. It's definately worth it.
| Posted by: | BOB MILLER, 50MILLER@BELLSOUTH.NET | | Subject: | CAGES | | When: | 7:04 AM, 20 Dec 2000 | | IP: | 65.80.38.66 |
IS THERE AN ADDRESS FOR "KLUBERTANZ" OR AN E-MAIL ADDRESS. I MADE A CAGE FROM VINYL COATED STAINLESS STEEL 1/2" MESH, BUT IT WAS RATHER EXPENSIVE I WAS REQUIRED TO BUY A 4' X 8' PANEL OF THE MESH. IT WORKED OUT WELL BUT IF THE MESH OU USED IS CHEAPER THEN IT MIGHT WORK OUT BETTER FOR ME WHEN I BUILD MY NEXT CAGE.
| Posted by: | Rebecca, fyrwoman1@aol.com | | Subject: | looking to buy | | When: | 7:14 AM, 20 Dec 2000 | | IP: | 205.188.198.36 |
I am looking to buy a sugar glide and I live in Northern Virginia, any breeders in this area?
| Posted by: | CJ | | Subject: | none | | When: | 1:05 PM, 20 Dec 2000 | | IP: | 64.1.143.122 |
Klubertanz web page is here:
<a href=http://members.aol.com/arba1/web/kk2.htm>http://members.aol.com/arba1/web/kk2.htm</a>
I built a 6 1/2 ft. tall cage for about $100 including the tools to make it. My two gliders love to fly around in there.
| Posted by: | Tucker, mcbergeson@yahoo.com | | Subject: | For Bob Miller | | When: | 4:26 PM, 20 Dec 2000 | | IP: | 12.75.179.161 |
I don't have a web address, here is their number, it's in WI, just describe what you need and they will cut to order and send it to you right away. It's 800-237-3899. I was very satisified with their work. Their wire is pre-cut to be 24" wide, they just cut the lengths you need, it's more expensive to get a different width cut. Mine was 4 pieces of 4' tall and 3 pieces (for top and double bottom-for tray) pieces for doors, door locks, and edging for the doors and with shipping it was under $50.00. We didn't use J-clips we just used zip ties (hardware store for 3 bucks) Her cage looks great and she loves it. Good luck! Email me if you have further questions.
|
| 
Home
Glider Gossip
Gliderpedia
Journals
Resources