In Reply to: Cage Building.. need some help with math. posted by Cindy on June 20, 2000 at 07:21:27:

If you are going to build your own cage you would need a sheet of wire at LEAST 48 inches TALL.
24 inches WIDE. times 4. for a total of 96 inches now you will need to add an additional 4 inches cuz once you take the sheet and cut 4 24 inch slots that will be 48 inches tall, you lose about an inch from each sheet, so you will want at least 100 inches of wire LONG.
So if you got a sheet of wire that was 48 inches tall<4 feet tall>X 108 inches LONGthen this will give you enough to build one cage and have the room to cut the edges, and a small 8 inch strip. to build a shelf perhaps.

I hope this helps.
:o)
Jacque

Follow Ups:

• Thank you so much Jaque, youve been an angel Cindy 11:21:27 06/20/2000 (0)