In Reply to: Re: Cage Building.. need some help with math. posted by Jacque on June 20, 2000 at 09:30:18:

: If you are going to build your own cage you would need a sheet of wire at LEAST 48 inches TALL.
: 24 inches WIDE. times 4. for a total of 96 inches now you will need to add an additional 4 inches cuz once you take the sheet and cut 4 24 inch slots that will be 48 inches tall, you lose about an inch from each sheet, so you will want at least 100 inches of wire LONG.
: So if you got a sheet of wire that was 48 inches tall<4 feet tall>X 108 inches LONGthen this will give you enough to build one cage and have the room to cut the edges, and a small 8 inch strip. to build a shelf perhaps.

: I hope this helps.
: :o)
: Jacque

Thx for the cage info, and I have decided i want to try and keep zia for now, but if i run into any problems i will do what is best for her.
Thx

Follow Ups: