Register Register New Posts Active Topics | Search Search | FAQ FAQ
 GliderGossip
 Photo Albums
 kazko's Albums
 kazko's Stealth Wheel
  Next |
Page: of 2
kazko's Stealth Wheel

Stealth wheel in cage
You can see both tracks on the side view

Now your sugar glider has a smooth running surface with no bolts
Push connector in until it snaps tightly against the wheel.
Insert track connector

Pull up both ends of the track
Cut a track connector from the vinyl FRP strip
With the track very snug inside, you want just a tiny separation between the ends of the inner track.

Cut off overlapping track
Press track tightly around wheel
Insert new inner track

Insert sand paper
Cut a piece of track and sand paper to length
That makes 8 bolts that the sugar glider must avoid when running at high speed.

Four bolts per track are right where the feet would be in the wheel.
Nylon bolt sticks out inside of wheel
Trim Trax held on with 4 nylon bolts
kazko's Stealth Wheel
 GliderGossip
 Photo Albums
 kazko's Albums
 kazko's Stealth Wheel
  Next |
Page: of 2

❧
 Copyright © 1997 - 2024 Sugarglider.com
TOS | Webmaster
❧